In this article
What are Sequences?
For any seasoned marketer, the Aloware Sequence resembles Email Drip campaigns. Aloware Sequence has independent jobs that run after a certain period of time (either relative to each other or relative to the beginning of the campaign).
Aloware Sequence is a feature that helps to initiate and nurture your business and customer relationships because it:
Sends timely communication to the right targets, automatically
Enrolls leads automatically with the right tagging
Creates triggers and actions for a smooth business flow
It supports two (2) actions:
Creating workflow (Steps)
Triggers and Intake
Only admins can create sequences in Aloware Classic
How to Set Up a Sequence
Step 1: Creating a New Sequence
In the Sequences+ Tab, click the +New Sequence button
Set the configurations in the New Sequence page wizard:
Name - Specify a sequence name that is easily understood by you and your team
Process On - Sequence can send every day or be limited to business days (Mon-Fri, excluding holidays)
Run on National Holidays - See Holidays Respected by Sequences
Day Schedule - Sequence observes the contact's time zone and can take “open” and “close” hours (set time range). Messages will be sent the next day if the business is closed.
Throttle - Set the number of leads to process per minute
Outbound Line - Assign line
The sequence can stop itself if a lead takes a certain action, usually responding to a message, or making a call (Disenroll on response checkbox)
All of our workflows automatically process “Do Not Call” requests and “STOP” requests and comply with DNC regulations.
Click the Save and Continue button once you're done.
Step 2: Adding Steps Flow
Aloware Sequence Steps indicate a flow of automated tasks that run in a time-based manner.
When you have created a New Sequence, click the +Add Steps button in the Steps tab.
List of Sequence Step Types
You can add different sequence types:
Progressive Dialer - Calls the contact, confirms they pick up, then calls agents in a ring group. It commonly uses the prompt message instructing the contact, i.e., Press 1 to connect, press 2 to end the call, and press 9 to stop receiving the call.
Preview Dialer - Calls a ring group on the line, then connects an agent to the enrolled contact. Aloware repeats the preview dialer message for agents until they press any key before connecting them to the contact.
You can send a message to the contact in this format, "Hey [AgentName], we are about to call [FirstName] [LastName] from [State]."
Automated SMS Messaging
Send SMS Message - Send an automatic text message to the enrolled contact
Send Picture/ MMS Message - Sends an automatic picture MMS message to the enrolled contact
Send SMS to Ring Group - Sends an SMS text message to a ring group with the enrolled contact's information
Add Tag to Contact - Adds a tag to the enrolled contact
Remove Tag from Contact - Removes a tag from the enrolled contact
Change Contact Disposition Status - Changes the disposition status of the enrolled contact
Mark Contact as DNC - Marks the enrolled contact as DNC (Do Not Contact)
Change Contact's Owner - Changes the enrolled contact's owner
Send Webhook - Sends a webhook with the enrolled contact's information as payload
Automated Line and Voicemail
Send Ringless Voicemail - Sends a ringless voicemail to the enrolled contact within the US and CA (only for verified accounts)
Add to Power Dialer - Adds the contact to a user's Power Dialer
Round-robin Change Contact Owner - Changes the enrolled contact's owner in a round-robin way
Add Line to Contact - Adds an initial line to the enrolled contact
Change Lead Source - Updates contact's lead source
Step 3: Setting Intake & Triggers
The Intake and Triggers section determines which contacts will enroll in or disenroll from the Sequence.
Lead Intake By Email
Aloware automatically enrolls any contacts sent to this special email address.
Triggers work alongside the sequence flow. These are applied when contacts enrolled in the sequence trigger a very specific behavior or action, which ensures that contacts that still qualify will continue moving through the flow.
Click the "Add Trigger" button in Intake & Triggers tab
Select the Trigger Types:
Add Contact Disposition Trigger - when contact is disposed to a status (connected, bad timing, etc.), select action either to enroll or disenroll from this sequence
Add Call Disposition Trigger - when a call is disposed to a status (connected, busy, etc.), select action either to enroll or disenroll to this sequence.
Add Contact Trigger - when a contact is created, it will automatically enroll in this sequence.
Add Call Trigger - when an outbound call is placed AND its duration (talk time, wait time, duration) is greater than or equals X seconds, disenroll from this sequence.
Add Contact DNC Trigger - when contact is Set or Removed from DNC, then enroll in this sequence.
Add Appointment Trigger - when an appointment is set, shown, or canceled, the contact will be enrolled in this sequence.
Once set, click Save Triggers button.
Step 4: Enroll Contacts
To complete the Sequence setup, you need to add or enroll contacts in the sequence.
Click the "Enroll Contacts" button to add contacts
Select from the existing lines or from the existing tags under Contact Group, or enroll a new single contact
How to Check Sequence Activity
Aloware allows you to see the activities happening in your sequence.
In the Sequence menu, navigate to the History tab.
The Sequence Activity History dashboard displays what takes place in your sequences.