Skip to main content

Account menu: Calling

Set account-wide call rules in Aloware: default line, greetings, recordings, retention, wrap-up, forced dispositions and availability.

Written by Laarni D

The Calling section of Account sets the call rules for every user in the account: which line outbound calls use, what contacts and callers hear, recordings, wrap-up after each call and agent availability. Its cards follow the order in which they apply to a call: Outbound calls, Inbound calls, During calls, Recordings, Post call and Availability.

To get there, click Account in Aloware Admin, then Calling under Voice.


Outbound calls

Default line: outbound calls go out on this line. With no default line, agents pick a line before each call.

Force default line: agents can't set a different line in their profile.

Wait voice: agents hear “Connecting...” as an outbound call starts.

Greeting: contacts hear this recording when they answer an outbound call. An agent's own greeting plays instead, unless the account greeting is forced for all agents.

Greetings on AloAi calls: on outbound AloAi Voice Agent calls, the contact hears the account greeting before the AloAi agent starts speaking. It plays on every AloAi outbound call, whichever agent or campaign starts it, and the AloAi agent speaks only after it finishes.

With no account greeting set, nothing plays and the AloAi agent starts normally. Human and AloAi outbound calls share this greeting. AloAi inbound calls do not play it.


Inbound calls

AI Call Rescue (Beta): an AloAi voice agent answers the inbound calls your team misses, based on your routing rules. It collects the caller's intent and details and saves the interaction for follow-up.

These calls are recorded and transcribed, and a summary note is saved. It applies to all lines and inboxes, except a line that has its own AloAi agent set in its missed call settings.

The setting explains in place what turning it back on does: missed calls on every line and inbox go to its agent again, at $0.10/min for basic voice models. See AI call rescue in Aloware.


During calls

Custom hold music: callers on hold hear your audio instead of the default music.

Call masking: transfers, inbound and outbound, show the contact's number as the caller ID. See How to set up call masking in Aloware.

Third-party beep: plays a short beep when a supervisor joins a live call to barge or whisper, so the agent knows someone joined.

Voicemail drop: lets agents leave a pre-recorded voicemail when a call reaches voicemail, without speaking live. When it is off, no one can use or add voicemail drops in calls or Power Dialer sessions, and hovering over the option shows “VM Drop Disabled at Account Level”.

Other call shortcuts and dialing features keep working. When you turn it back on, agents can use voicemail drop and manage their shortcuts right away, without refreshing the page.


Recordings

Inbound calls: choose Line's setting, Always or Never. With Always, every inbound call is recorded after the recording notice.

Recording notice: choose Text to speech or Audio file. Callers hear the notice before a recorded call starts.

Outbound calls: choose Line's setting, Always or Never. Agents' own settings decide until you turn on Force outbound recording.

Force outbound recording: agents can't change their own outbound recording setting.

Record external transfers: calls transferred to a number outside Aloware follow the recording settings above. When it is off, the part of the call after the transfer to the outside number is not recorded.

Dual-channel recordings: records the agent and the contact on separate channels of the same recording. Transcripts then show the agent’s and the contact’s words on separate rows, and one recording covers the whole call, including holds, parks and transfers.

Retention: sets how long call recordings are kept before they are deleted. Every line follows this setting unless it is set to Each line's setting. Only billing admins can change it. See Managing call recording deletions and retention in Aloware.


Recording calls on some lines only

You can record calls on some lines and not on others. This works only when the account recording setting is Line's setting.

To record calls on some lines only:

  1. In Aloware Admin, click Account, then Calling.

  2. Under Recordings, set Inbound calls to Line's setting.

  3. Click Lines and open a line.

  4. Click Greet & record, then turn Record calls on or off for that line.

  5. Click Save. Repeat for each line.

If Inbound calls is set to Always or Never, every line follows the account setting. The line then shows Forced at account level.

For outbound calls, Outbound calls also offers Line's setting. Agents' own settings decide until Force outbound recording is on.


Post call

Wrap-up time: how long agents stay in wrap-up after a call, to write notes or log outcomes, before they are available again. Agents can set their own wrap-up time in their profile.

Force wrap-up time: agents can't change their own wrap-up time, so every agent uses the account's wrap-up time.

Force call disposition and Force contact disposition (both Beta): until the agent disposes the call or the contact, the wrap-up timer pauses and the back button, callback and status menu lock.

Force HubSpot call type (Beta): agents can't finish a call or move to the next one until they pick its HubSpot call type. It needs the HubSpot integration turned on and call types imported with Pull Activity Types. It applies to Aloware Talk on desktop, the HubSpot widget and Power Dialer sessions.

It also applies in the Aloware iOS and Android apps, version 2.17.6 or later.

Warm transfers and HubSpot call type: in a warm transfer, the original call is handed off to the second agent, and Aloware creates a new communication record so the first agent can complete their own wrap-up. Each agent fills in the required fields, including HubSpot call type, on the communication that belongs to them.

With Force HubSpot call type on, the requirement applies to each agent's own communication. After a warm transfer, each agent finishes their own wrap-up before starting another call, so both records stay accurate for reporting.


Availability

Keep users available: everyone is Available from sign-in to sign-out and can't switch to Busy or Break. Admins can change a user's status from the wallboard in Aloware Talk. See Managing agent status on the wallboard.

Did this answer your question?